自然清洁法。我们将需要清洗的高速护坡模具放在室外暴晒三天左右的时间，等到上面的泥土以及各种杂质都变干枯的时候，再放进水池中。一般情况下，在水中浸泡一到两个小时，模具上面的垃圾就能完全化解开来，之后再用猛水一冲即可。
Natural cleaning method. We will need to clean the high-speed slope protection mold in the outdoor sun exposure for about three days, until the above soil and various impurities are dry, then put into the pool. Generally speaking, after soaking in water for one to two hours, the garbage on the mould can be completely dissolved, and then it can be flushed with heavy water.
酸性溶液清洁法。高速护坡模具尤其是金属性质制造的模具，在使用过程中难免会出现生锈的现象，即使是塑料模具也会有各种各样的污渍在其表面，而一般的清洁方法是不能完全去除它们的。这时，酸性溶液就能很好的解决这一问题。用湿布沾取酸性溶液擦拭模具表面就可以看到效果，然后再用清水冲洗。
Acid solution cleaning method. High-speed slope protection moulds, especially those made of metal properties, will inevitably rust in the use process. Even plastic moulds will have a variety of stains on their surface, and the general cleaning methods can not completely remove them. At this time, acid solution can solve this problem very well. The effect can be seen by wiping the surface of the mould with acid solution dipped in wet cloth, and then rinsing with clean water.