| 六角护坡模具制作工艺 |
| 添加时间：2018/9/21 15:11:55 浏览次数： |
| 六角护坡模具采用pp的材质，pp具有很好的韧性，可溶性和可塑性， 塑料颗粒高温下化成液态，是液体流入特定好的铁模具中，利用液态水循环使其冷却，塑料就根据铁模具的规格而塑型，当然铁模具是根据每个客户的图纸特定的，从而产生六角护坡模具各种尺寸。 Hexagonal slope protection mold adopts the material of pp, PP has very good toughness, solubility and plasticity, plastic particles melt into liquid at high temperature, is liquid into a specific good iron mold, using liquid water circulation to cool it, plastic mold according to the specifications of iron mold, of course, iron mold is specific according to each customer's drawings Thus, the six corners of the slope protection mould can be produced in various sizes. 六角护坡模具成型后，加入一定配比的水泥（混凝土），24小时左右托模，成品跟模具的尺寸规格一样。简单便捷。 After the hexagonal slope protection mold is formed, a certain proportion of cement (concrete) is added to the mold. The finished product is the same size as the mold. Simple and convenient. |
| 上一页 石笼类护坡 |
| 下一页 六角护坡模具应用 |
Copyright © 技术支持：遨游网络