| 高速护坡模具采用不同的表面强化处理工艺 |
| 添加时间：2019/8/16 15:17:05 浏览次数： |
| 高速护坡模具采用不同的表面强化处理工艺,可使模具使用寿命提高几倍甚至于几十倍.热处理技术一定要到位,温度的适中对于产品的质量有决定性的作用,温度过高会导致产品尺寸有所误差,而温度过低产品的性能就会达不到指标,因此热加工技术是最考验细心耐心和技术的环节,是最重要的质量关键所在. The service life of high-speed slope protection die can be increased several times or even tens of times by adopting different surface strengthening treatment processes. Heat treatment technology must be in place. Proper temperature plays a decisive role in the quality of the product. Excessive temperature will lead to errors in product size, and the performance of products with too low temperature will not reach the target. Therefore, hot working technology is the most test of patience and technology, is the most important quality key. |
| 上一页 中国的模具产品在技术含量上面的欠缺 |
| 下一页 冲切母模之形状设计应考量之要项 |
Copyright © 技术支持：遨游网络