| 养护初期应让坡面保持湿润状态 |
| 添加时间：2019/9/20 14:47:18 浏览次数： |
| 覆盖无纺布：喷播后应及时覆盖无纺布，从上到下平整覆盖，坡顶延伸30cm用土压住；两幅相接叠加10cm，然后用竹签或3#铁线做成的"U"型钉进行固定，固定间距100cm。待草长到5～6cm或2～3片叶时，揭去无纺布，揭布前应控水，揭布后及时补水。 Cover non-woven fabric: cover non-woven fabric in time after spraying, cover smoothly from top to bottom, extend 30 cm at the top of slope and press with soil; two pieces overlap 10 cm, and then fix with "U" nails made of bamboo sticks or 3# wire, with fixed spacing of 100 cm. When the grass grows to 5-6 cm or 2-3 leaves, uncover the non-woven fabric, control the water before uncovering, and replenish the water in time after uncovering. 养护：喷播1～2天后开始养护，养护初期应让坡面保持湿润状态，初期养护时间为45～60天，以每天浇水为主，早晚各一次。待草长到10cm以上时靠自然降水，但如果连续高温干旱时间超过5天，应安排浇水。 Maintenance: Maintenance begins after 1-2 days of spraying. In the initial period of maintenance, the slope should be kept in a wet state. The initial period of maintenance is 45-60 days, mainly watering every day, once in the morning and once in the evening. When the grass grows to more than 10 cm, it depends on natural precipitation, but if the continuous high temperature and drought lasts more than 5 days, water should be arranged. |
| 上一页 热流道模具和传统模具的区别 |
| 下一页 网格护坡塑料模具就根据护坡铁模具的规格而塑型成型 |
Copyright © 技术支持：遨游网络