| 拱形骨架护坡模具是用于制作拱形护坡的重要工具 |
| 添加时间：2021/7/13 15:22:44 浏览次数： |
| 拱形骨架护坡模具是用于制作拱形护坡的重要工具，它的使用方法很简便，只需要根据客户的需求制作出相应尺寸的拱形护坡模具然后带到施工现场进行现场注浇的生产拱形护坡，一般拱形护坡的直径会在2米到3米之间根据客户指定的尺寸制作出相应尺寸的模具，深度一般会在30-60厘米之间，也是根据客户需求制定，拱形护坡模具是由上拱圈，下拱圈还有两侧的直线段模板组成，首先清点模具的具体数量，使用到的面板数量，螺栓数量，然后运输到施工现场进行制作，首先拼接组装模具，使用电动扳手把模具连接处的螺栓固定好，然后检查没有留缝隙之后就要在模具的内壁处刷上一层工业机油盖土网 防寒布 麻绳 油麻绳 麻刀 沥青麻绳 静压造型线 自动浇注机 铸铁拍门 钢制拍门 玻璃钢拍门，然后注入混凝土使用振动棒把混凝土中出现的气泡全部震动出来，震动大约20分钟左右，因为各地的天气情况不同，所以混凝土凝固的时间也不同，像雨季多的南方凝固时间就会长久一些，北方相对来说凝固时间会短一些，一般3天就可以彻底固，使用模具制作的拱形护坡表面光滑，耐用性强。 The arch skeleton slope protection mold is an important tool for making arch slope protection. Its use method is very simple. It only needs to make the corresponding size of the arch slope protection mold according to the customer's needs, and then take it to the construction site for on-site pouring production of arch slope protection. Generally, the diameter of the arch slope protection will be between 2M and 3M, and the corresponding size of the mold will be made according to the size specified by the customer, The depth is generally between 30-60 cm, which is also formulated according to the customer's needs. The arch slope protection mold is composed of the upper arch ring, the lower arch ring and the straight line section templates on both sides. First, count the specific number of molds, the number of panels used and the number of bolts, and then transport them to the construction site for production. First, assemble the mold, Use an electric wrench to fix the bolts at the joint of the mould. After checking that there is no gap left, brush a layer of industrial oil on the inner wall of the mould, and then inject concrete. Use a vibrator to shake all the bubbles in the concrete for about 20 minutes. Because of different weather conditions in different places, the time of concrete setting is also different, For example, in the rainy season, the solidification time will be longer in the south, and shorter in the north. Generally, it can be completely solidified in 3 days. The arched slope protection made by mould has smooth surface and strong durability. |
| 上一页 高速护坡模具材料的选用既要满足客户对产品质量的要求 |
| 下一页 六角护坡模具制作工艺 |
Copyright © 技术支持：遨游网络