| 护坡模具如何创造模具市场的制高点 |
| 添加时间：2018/11/7 16:24:20 浏览次数： |
| 随着时代的不断的发展,现在对于高速护坡模具的精度要求也越来越高,对材料的要求也相应的增加.现在生产的高速护坡模具所需要的材料一般都有着良好的均具有较好的切削加工、热处理和抛光性能及较高强度.在选择材料的时候还要注意,模具相互运动的两个模块不要选择同种材质,保证模具的使用寿命.同时我们还要注意高速护坡模具和制件之间的亲和力,防止粘连对模具造成损坏,模具的选材要考虑到生产的高速护坡模具的要球,这是我们生产高速护坡模具非常重要的一点,这是非常关键的一点.我国的高速护坡模具有望创造新的历史最高点,市场需求庞大是我国刀具行业兴旺发展的重要因素.在消费的刺激下,我国的刀具生产规模正在不断扩大.在刀具市场的推动下,我国的刀具模具的市场需求必然会得到提升,将会促进国内刀具模具产业更好发展.高速护坡模具变形:在生产过程中注塑护坡钢模具在出模时变形了,就要考虑到,模温、料温和产品出模时温度较高,还是保压时间不够充足和残余应力的作用等非设计原因,或者是护坡钢模具产品壁厚薄不均匀等都要考虑到. With the continuous development of the times, the requirement for the precision of high-speed slope protection die is becoming higher and higher, and the requirement for materials is also increasing accordingly. The materials needed for high-speed slope protection die now generally have good cutting, heat treatment, polishing performance and high strength. At the same time, we should also pay attention to the affinity between the high-speed slope protection die and the parts, so as to prevent the damage of the die caused by adhesion. The material selection of the die should take into account the key balls of the high-speed slope protection die, which is our production of high-speed protection. Slope moulds are very important, which is a key point. China's high-speed slope protection moulds are expected to create a new historical peak. The huge market demand is an important factor for the prosperity and development of China's tool industry. Stimulated by consumption, the scale of tool production in China is constantly expanding. Driven by the tool market, China's tool industry is expanding. The market demand of moulds will inevitably be raised, which will promote the better development of domestic tool and mould industry.Deformation of high-speed slope protection moulds: When the moulds of injection moulding slope protection steel are deformed in the production process, it must be considered that the moulding temperature, material temperature and product temperature are higher when they are out of moulds, or the effect of insufficient holding time and residual stress, etc. Non design reasons, or uneven thickness of steel products for slope protection should be taken into account. |
| 上一页 塑料模具设计的步骤 |
| 下一页 六角护坡模具分类 |
Copyright © 技术支持：遨游网络